10,000 Pa workhorse for busy studios & small shops
Usage scenarios
- Laser engraving & cutting (wood, acrylic, leather)
- Soldering & electronics rework
- 3D-printing enclosures & resin post-processing
- Craft studios, classrooms & maker spaces
PA-FS500 Pro Fume Extractor
10,000 Pa workhorse for busy studios and small shops.
Industrial systems are configured to your machines, duty cycle and duct layout, and ship by freight (LTL). Tell us about your shop and an engineer will respond within one business day.
Usage scenarios
- Laser engraving & cutting (wood, acrylic, leather)
- Soldering & electronics rework
- 3D-printing enclosures & resin post-processing
- Craft studios, classrooms & maker spaces
Get Factory-Direct Pricing
Engineer reply within 1 business day · volume pricing available
Engineered Ahead of the Spec Sheet
HEPA H14
99.99% @ 0.3 µm
One full grade above the H13 filters common in consumer fume extractors — H14 medical-grade media captures 99.99% of 0.3-micron smoke particles, the size laser fumes actually are.
Up to 10,000 Pa
High negative pressure
Suction that stays strong as filters load. High static pressure keeps capture velocity at the laser bed even months into a filter's life — no fade, no smell creeping back.
90–257 V
Multi-voltage, worldwide
Dual-range input (90–110 V / 210–257 V, 50/60 Hz) means the same unit runs anywhere on earth. Moving your studio abroad? Your extractor comes with you.
Product Details
When your side hustle becomes a production schedule, the PA-FS500 delivers 10,000 Pa of negative pressure, a 1.1 kW industrial brushless blower rated for 30,000 maintenance-free hours, and PURE-AIR's full triple-stage filtration — the same platform trusted across 70+ countries and 30+ industries.
Engineering Specs
| Airflow | 500 m³/h |
| Pressure | 10,000 Pa |
| Noise | < 60 dBA |
| Filtration | Pre + F9 + HEPA H14 + Carbon |
| Inlet | 75 / 100 mm |
| Size / Weight | 500×562×1040 mm · 83 kg |
| Works up to | 80×100 cm bed lasers |
| Works with | OMTech 80W / 100W, Thunder Nova 24/35, Aeon MIRA 7 / MIRA 9, Epilog Fusion Pro, ULS ULTRA 9, Trotec Speedy 360 / 400, Multi-machine studios |
Annual Filter Cost, Compared
Typical hobbyist duty cycle (~10 hrs cutting/week). The extractor is cheap to buy — filters decide what it really costs.
2 sets/yr — modular, replace per stage. Current pricing on request.
6 packs/yr — sealed, all-or-nothing
3 units/yr @ $250 (list price)
Subscribe & Save cuts PURE-AIR filter costs another 15% on every set. Run your own numbers →
One Extractor, Every Bench in the Shop
The same triple-stage stack handles particulate and gas-phase pollution across every maker workflow.
Laser Engraving & Cutting
Wood, acrylic, leather, MDF — captures smoke and VOC odor at the exhaust port before it fills the room.
Welding & Soldering
Hand soldering benches and laser welding stations — intercepts flux fume and heavy-metal aerosols at the source.
3D Printing
Resin post-processing and high-temp filament enclosures — clears styrene, VOCs and ultrafine particles.
Electronics & Lab Work
PCB rework, conformal coating and chemical experiments — bench-side extraction with a positionable arm or duct.
Certifications & Compliance
Every PURE-AIR unit ships from an ISO 9001-certified filtration factory with 10+ years of industrial extraction experience.
Compliance documentation (Declaration of Conformity, test reports) is available on request for commercial deployments — talk to an engineer.
Customer Reviews
You May Also Like
2-4 Day Delivery200 m³/h
Airflow
~2,500 Pa
Pressure
< 55 dBA
Noise
PA-F200s Portable Fume Extractor
Ultra-light entry extractor for portable & small diode lasers.
2-4 Day Delivery250 m³/h
Airflow
2,800 Pa
Pressure
< 60 dBA
Noise
PA-F250s Laser Marking Fume Extractor
Compact dual-stage extraction for marking & engraving benches.
2-4 Day Delivery300 m³/h
Airflow
3,700 Pa
Pressure
< 58 dBA
Noise
PA-FS300s Non-metal Fume Extractor
Triple-stage filtration for A4-format laser cutters.